| |
Extrusion blow moulding machine series
|
|
<<Back |
|
|
|
Full automatic extrusion blow moulding
machine(doule station) |
|
|
|
|
|
Technical features
Electrical control system:
The machine workds under the PLC control via a man-and-machine interface. The machine is equipped with a modularized temperature controller and perated through a touch-type colure screen. All the production data can be set up, midified, searched and monitored and the machine trouble diaagnosis can be complete both on the touch-type screen. The electric elements work on the non-contact working principle, thus being durable in service life.
Hydraulic system:
The machne works under the proportional pressure control. The machine is equipped with hydraulic vales and hydraulic pumps inported from world-famous companies, thus assuring consistent and reliable working performance. |
|
|
Plasticizing system:
The high peformance screw used on the machine assure thorough and homogeneous plasticization and mixing of plastics. |
|
Max.Product Volume |
2 L |
Dry cycle |
900x2 pc/h |
Screw Diameter |
60 mm |
Screw ratio |
22-30 L/D |
Screw dive power |
15-18.5 kw |
Screw heating capacity |
5.04-6.7 (3 Φ KW) |
No.of heating zone |
3-4 |
Output of HDPE |
65-80 kg/h |
Output of PVC |
70-85 kg/h |
Oil pump drive power |
5.5 kw |
Clamping force |
37 kn |
Mold stroke |
138-368 mm |
Max size of mold(L*H) |
300*320 |
Max die diameter |
90mm |
Die heat capacity |
1.8(3 Φ KW) |
No. of heat zone |
3 |
Central distance of bi-die |
130mm |
Max. die diameter |
55 mm |
Heating capacity |
3(3 Φ KW) |
Blowing pressure |
0.6 Mpa |
Air volume |
0.4 M3/min |
Cooling water pressure |
0.2-0.3Mpa |
Water consumption |
50 L/min |
Size(L*W*H) |
2.7*1.89*2.55m |
Weight |
4.2 T |
|
|
|
|
