CMEC General Machinery Import & Export Co., Ltd.

PET BLOW MOULDING MACHINERY		<<Back	Next>>
	Pgae 1 2 3 4 5 6 7 8 9

CM-SBM-400 Semi-automatic stretch blow moulding machine

CM-SBM-400 semi-automatic stretch blow moulding machine is suitable to produce different shaped of PET/PC/PE bottle. It can blow 100ml to 6000ml bottles and is widely used to produce Mineral water, carbonated drink, juice, medicine, cosmetic and oil bottles etc.

The machine adopts revolving infrared pre-heat system. It ensures PET performs be heated evenly.
The machine uses mechanical-double-arm mould clamping which ensures the mould be closed tightly even under high pressure and high temperature.

The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different pressure requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
The machine is also equipped with silencer and oiling system to lubricate the mechanical parts of the machine.
The machine can be operated in the step-by-step mode and the semi-auto mode.
Wide-mouth and hot-fill bottles can also be made.

TYPE	ITEM	UNIT	TECHNICAL DATA
CONTAINER	Container volume	L	0.1-2.0L (2-cavity) 1-6L (1-cavity)
	Theoretical output	Pcs/hr	0.1-2.0L (800) 1-6L (400y)
	Neck diameter	mm	φ120
	Bottle diameter	mm	180
	Bottle height	mm	350
MOULDING	Max.mould plate dimension(L×W)	mm	540×500
	Max.mould thickness	mm	260
	Clamping force	KN	90
	Mould opening stroke(Adjustable)	mm	235
AIR COMPRESSOR	Air compressor	M³/Mpa	≥0.6/3.0L
AIR COMPRESSOR	Air pressure for blowing	Mpa	30
MAIN MACHINE ELECTRICITY	Power	KW	12
MAIN MACHINE ELECTRICITY	Voltage/Frequency	V/HZ	380-220/50-60(3-phase)
MACHINE SIZE AND WEIGHT	Main machine (L×W×H)	M	2.0×0.65×1.8
	Main machine weight	Kg	650
	Heater(L×W×H)	M	1.7×0.6×1.5
	Heater weight	Kg	300
SAFTY	Auto-emergency alarm

<<Back

Pgae 1 2 3 4 5 6 7 8 9

Next>>

If you have any question, please mail to aiweicmec@163.net